Recommended |
---|
MSRP | $7,500 | |
---|---|---|
Where to Buy | — $1 At | |
Category | Enduro | |
Carbon | ||
Fork | Fox Factory Float 36 | |
Shock | Fox Float DPX2 Factory | |
Wheels | Carbon | |
29″ | ||
Brakes | Hydraulic Disc | |
Groupset | X01 Eagle, Truvativ Descendant Carbon | |
Drivetrain | 1 × 12 | |
Suspension | Full | |
Front Travel | 160mm | |
Rear Travel | 150mm | |
Brand Site | ||
Summary | The Specialized Stumpjumper EVO Pro is a 29″ carbon frame full suspension enduro bike with ultra high-end components. |
Frame | FACT 11m carbon chassis and rear-end, asymmetrical design, Mixed Wheel Trail Geometry, SWAT™ Door integration, head tube angle adjustment, horst pivot BB adjustment, threaded BB, fully enclosed internal cable routing, 12x148mm dropouts, sealed cartridge bearing pivots, replaceable derailleur hanger, 150mm of travel BB Standard: BSA, 73mm, Threaded Color: Satin Maroon / White Mountains | |
---|---|---|
Fork | FOX FLOAT 36 Factory, GRIP2 damper, Kashima Coating, 15x110mm, 44mm offset, S1: 150mm of travel, S2-S6: 160mm of travel | |
Shock | FOX FLOAT DPX2 Factory, Rx Trail Tune, EVOL Air sleeve, Kashima coat, 3-position adjustment w/ Open Mode adjustment, S1:210x50mm, S2-S6:210x55mm | |
Bottom Bracket | SRAM DUB, BSA 73mm, threaded | |
Stem | Deity, 35.0mm | |
Handlebar | Roval Traverse SL Carbon, riser bar, 6-degree upsweep, 8-degree backsweep, 30mm rise, 800mm, 35.0mm | |
Saddle | Bridge, 155/143mm, Hollow Ti-rails | |
Seatpost | Fox Transfer Factory, 30.9, 1X remote, (S1:125mm, S2/S3: 155mm, S4-S6: 175mm) | |
Grips | Deity, Knuckleduster, Black |
Rear Derailleur | SRAM X01 Eagle, 12-speed | |
---|---|---|
Crank | SRAM Descendant Carbon, DUB, S1:165mm, S2-S5: 170mm, S6: 175mm, 30T | |
Shifters | SRAM X01 Eagle, trigger, 12-speed | |
Cassette | SRAM XG-1295 Eagle, 10-52t | |
Chain | SRAX X01 Eagle, 12-speed | |
Brakes | Front: SRAM Code RSC, 4-piston caliper, hydraulic disc, 200mm, Rear: SRAM Code RSC, 4-piston caliper, hydraulic disc, 200mm |
Rims | Roval Traverse Carbon 29, hookless carbon, 30mm inner width, hand-built, 2Bliss Ready | |
---|---|---|
Spokes | DT Competition Race | |
Front Hub | DT Swiss 350, sealed cartridge bearings, 15x110mm spacing, 28h | |
Rear Hub | DT Swiss 350, Star Ratchet, 36t engagement, SRAM XD driver body, 12mm thru-axle, 148mm spacing, 28h | |
Tires | Front: Butcher, GRID TRAIL casing, GRIPTON® T9 compound, 2Bliss Ready, 29x2.3", Rear: Eliminator, GRID TRAIL casing, GRIPTON® T7 compound, 29x2.3" |