Recommended |
---|
MSRP | $3,499 | |
---|---|---|
Where to Buy | $3,499 43% off At Specialized | |
Category | Enduro | |
Aluminum | ||
Fork | Fox Factory Float 36 | |
Shock | Fox Float X Factory | |
Wheels | Aluminum | |
29″ | ||
Brakes | Hydraulic Disc | |
Groupset | GX Eagle | |
Drivetrain | 1 × 12 | |
Suspension | Full | |
Front Travel | 160mm | |
Rear Travel | 150mm | |
Brand Site | ||
Summary | The Specialized Stumpjumper EVO Elite Alloy is a 29″ aluminum frame full suspension enduro bike with high-end components. |
Based on frame geometry and build specs.
Frame | M5 Alloy chassis and rear-end, asymmetrical design, 29" Trail Geometry with S-Sizing, SWAT™ Door integration, head tube angle adjustment, horst pivot BB adjustment, threaded BB, fully enclosed internal cable routing, 12x148mm dropouts, sealed cartridge bearing pivots, replaceable derailleur hanger, 150mm of travel BB Standard: BSA, 73mm, Threaded Color: Satin Aluminum / Gunmetal | |
---|---|---|
Fork | FOX FLOAT 36 Factory, GRIP2 damper, 15x110mm, 44mm offset, S1: 150mm of travel, S2-S6: 160mm of travel | |
Shock | FOX FLOAT X Factory, Rx Trail Tune, EVOL Air sleeve, 2-position lever w/ LSC adjustment, S1:210x50mm, S2-S6:210x55mm | |
Bottom Bracket | SRAM DUB, BSA 73mm, Threaded | |
Stem | Deity, 35.0mm | |
Handlebar | Specialized, 6061 alloy, 6-degree upsweep, 8-degree backsweep, 30mm rise, 800mm width | |
Saddle | Bridge Comp, Hollow Cr-mo rails, 155/143mm | |
Seatpost | OneUp, Dropper Post-V2, MMX lever, 34.9 (S1:120mm, S2/S3:150mm, S4: 180mm, S5/S6: 210mm) | |
Pedals | PEDAL, TEST RIDE PEDALS PROVIDED BY SPECIALIZED |
Rear Derailleur | SRAM GX Eagle, 12-speed | |
---|---|---|
Crank | SRAM GX Eagle, DUB, S1:165mm, S2-S5: 170mm, S6: 175mm, Alloy, 30T | |
Shifters | SRAM GX, trigger, 12-speed | |
Cassette | SRAM XG-1275, 12-speed, 10-52t | |
Chain | SRAM GX Eagle, 12-speed | |
Brakes | Front: SRAM Code RS, 4-piston caliper, hydraulic disc, 200mm, Rear: SRAM Code RS, 4-piston caliper, hydraulic disc, 200mm |
Rims | Roval Traverse 29 Alloy, 30mm inner width, hand-built, 2Bliss Ready | |
---|---|---|
Spokes | DT Swiss Competition Race | |
Front Hub | Roval, sealed cartridge bearings, 15x110mm spacing, 28h | |
Rear Hub | Roval DT Swiss 370, Ratchet LN, SRAM XD driver body, 12mm thru-axle, 148mm spacing, 28h | |
Tires | Front: Butcher, GRID TRAIL casing, GRIPTON® T9 compound, 2Bliss Ready, 29x2.3", Rear: Eliminator, GRID TRAIL casing, GRIPTON® T7 compound, 2Bliss Ready, 29x2.3" |