Recommended |
---|
MSRP | $11,000 | |
---|---|---|
Where to Buy | — $1 At | |
Category | Enduro | |
Carbon | ||
Fork | Fox Factory Float 36 | |
Shock | Fox Float DPX2 Factory | |
Wheels | Carbon | |
29″ | ||
Brakes | Hydraulic Disc | |
Groupset | XX1 Eagle AXS, X01 Eagle | |
Drivetrain | 1 × 12 Electronic | |
Suspension | Full | |
Front Travel | 160mm | |
Rear Travel | 150mm | |
Brand Site | ||
Summary | The Specialized S-Works Stumpjumper EVO is a 29″ carbon frame full suspension enduro bike with ultra high-end components. |
Frame | FACT 11m carbon chassis and rear-end, carbon shock extension, asymmetrical design, 29 Trail Geometry, SWAT™ Door integration, head tube angle adjustment, horst pivot BB adjustment, threaded BB, fully enclosed internal cable routing, 12x148mm dropouts, sealed cartridge bearing pivots, replaceable derailleur hanger, 150mm of travel BB Standard: BSA, 73mm, Threaded Colors: Gloss Carbon / Black / Brushed Black Chrome; Satin Redwood / Black / Carbon | |
---|---|---|
Fork | FOX FLOAT 36 Factory, GRIP2 damper, Kashima Coating, 15x110mm, 44mm offset, S1: 150mm of travel, S2-S6: 160mm of travel | |
Shock | FOX FLOAT DPX2 Factory, Rx Trail Tune, EVOL Air sleeve, Kashima coat, 3-position adjustment w/ Open Mode adjustment, S1:210x50mm, S2-S6:210x55mm | |
Bottom Bracket | SRAM DUB, BSA 73mm, threaded | |
Stem | Deity Copperhead, 35.0mm | |
Handlebar | Roval Traverse SL Carbon, riser bar, 6-degree upsweep, 8-degree backsweep, 30mm rise, 800mm, 35.0mm | |
Saddle | Bridge, 155/143mm, Hollow Ti-rails | |
Seatpost | RockShox Reverb AXS, 30.9, 1X remote, (S1:100mm, S2: 125mm, S3: 150mm, S4-S6: 170mm) | |
Grips | Deity, Knuckleduster, Black |
Rear Derailleur | SRAM XX1 Eagle AXS | |
---|---|---|
Crank | SRAM X01 Eagle, DUB, S1:165mm, S2-S5: 170mm, S6: 175mm, Alloy, 30T | |
Shifters | SRAM XX1 Eagle AXS | |
Cassette | SRAM XG-1299 Eagle, 10-52t | |
Chain | SRAM XX1, 12 speed | |
Brakes | Front: SRAM Code RSC, 4-piston caliper, hydraulic disc, 200mm, Rear: SRAM Code RSC, 4-piston caliper, hydraulic disc, 200mm |
Rims | Roval Traverse SL 29, hookless carbon, 30mm inner width, 2Bliss Ready, hand-built, 28h | |
---|---|---|
Spokes | DT Competition Race | |
Front Hub | Roval Traverse SL, sealed cartridge bearings, 15mm thru-axle, 110mm spacing | |
Rear Hub | Roval Traverse SL, DT Swiss Star Ratchet, 54t engagement, SRAM XD driver body, 12mm thru-axle, 148mm spacing | |
Tires | Front: Butcher, GRID TRAIL casing, GRIPTON® T9 compound, 2Bliss Ready, 29x2.6", Rear: Eliminator, GRID TRAIL casing, GRIPTON® compound, 29x2.3" |