Bullet Grey

Turmeric Yellow

Nukeproof Reactor 290 Alloy, 130mm Travel, custom triple butted hydro-formed tube set for front triangle and chain stays, UD woven carbon fibre Seat stays, internal cable routing, internal cable routing, ISCG 05 mount, Enduro bearings, threaded 73mm BB, Boost 148mm rear axle spacing, 3D contoured rubber frame protection

RockShox Super Deluxe Ultimate RCT, Custom Compression LIN, Rebound L 320 tune, 210x50mm, Bearing End, 1x bottomless token fitted

From concept through to design, the Kinematics, the geometry and specification; the Reactor is designed from the ground up to be the ultimate aggressive trail bike. It is at home on technical climbs, but happiest when thrashing the most technical trails you can point it at. The Reactor frame is crafted from hydroformed triple butted 6061 aluminum. To reduce unsprung mass the seatstays on the Reactor are molded from carbon fibre. All frames are available for 27.5” or 29” wheel sizes. Each wheel size is based on two totally different, compromise free frames. Each were designed and developed at the same time and optimized around each wheel size. Speed or play: which do you value more? The maneuverability of 27.5” or the raw speed of a 29”? All Reactor frames feature a “flip chip” to adjust the geometry from “Trail” to “Rail mode”. Trail – As the name suggests, this setting is best suited for trail riding. It is for riders who get as much enjoyment from the climb as the descents, Rail - The Rail setting turns the Reactor into a corner shredder, dropping the bottom bracket 6mm and slackening the head angle by half a degree. It is there to maximize the descending capabilities. To ensure the bike could climb as well as it descends, we designed the 4 bar horst linkage to have higher levels of anti-squat for climbing gears but lower levels when you drop down the cassette. This means that the bike can behave itself on the climbs but when you get it up to speed, it turns into a trail hooligan. The combination of low anti-squat and progressive rate give ultimate small bump compliance (removes rough trail and root chatter) with good mid stroke support for cornering/pumping and end stroke progression for aggressive riding. Balanced anti-rise figures allow the Reactor some squat when braking hard, maintaining rider position and providing a good amount of pressure through the tyre to ensure traction. The Reactor is designed to reward the rider and ensure you get that stoke factor in on any ride. Please Note: Due to severe delays in the bicycle supply chain, we have been forced to make some alterations to the specification of the component parts supplied with this bicycle. As a result the specification may differ from those shown in the images. Please refer to the specification table for accurate information.

MSRP	$2,299
Where to Buy	— $1 At
Category	Trail
Weight	8.3 lbs (frame)

Frame	Aluminum

	RockShox Super Deluxe Ultimate
Wheels
Wheel Size	29″




Drivetrain
Suspension	Full
Front Travel	150mm
Rear Travel	130mm
Brand Site	us.nukeproof.com
Summary	The Nukeproof Reactor 290 Alloy Frame is a 29″ aluminum frame full suspension trail frameset.

Frame	Nukeproof Reactor 290 Alloy, 130mm Travel, custom triple butted hydro-formed tube set for front triangle and chain stays, UD woven carbon fibre Seat stays, internal cable routing, internal cable routing, ISCG 05 mount, Enduro bearings, threaded 73mm BB, Boost 148mm rear axle spacing, 3D contoured rubber frame protection BB Standard: BSA, 73mm, Threaded Colors: Bullet Grey; Turmeric Yellow
Shock	RockShox Super Deluxe Ultimate RCT, Custom Compression LIN, Rebound L 320 tune, 210x50mm, Bearing End, 1x bottomless token fitted Travel: 130mm
Bottom Bracket	BSA, 73mm, threaded
Headset	Nukeproof, 44-56 IITS