 | Recommended |
|---|
MSRP | $8,499 | |
|---|---|---|
Where to Buy | — $1 At | |
Category | Enduro | |
Weight | 31.0 lbs | |
| Carbon | ||
Fork | Fox Factory Float 36 | |
Shock | ||
Wheels | Carbon | |
| 27.5″ | ||
Brakes | Hydraulic Disc | |
Groupset | XX1 Eagle, Truvativ Descendant Carbon | |
Drivetrain | 1 × 12 | |
Suspension | Full | |
Front Travel | 170mm | |
Rear Travel | 160mm | |
Brand Site | ||
Summary | The Jamis HARDLINE C1 is a 27.5″ carbon frame full suspension enduro bike with ultra high-end components. | |
Based on frame geometry and build specs.
Frame | Dyad Pro High Modulus Carbon Fiber, 160mm travel 3VO suspension, Enduro® Max sealed bearing pivots, 1.5 - 1 1/8” tapered head tube, 12x148mm thru-axle, Internal dropper post routing, Custom Jamis upper chainguide, MRP SXg lower chainguide, Fox DHX2 Factory Series coil shock w/2-position compression switch, SLS 400lb Spring, high/low speed compression, high/low speed rebound,10mm hardware, replaceable derailleur hanger | |
|---|---|---|
Fork | Fox Factory 36 Float 27.5" w/ 3-position adjust compression & lock-out,15x110mm axle, air spring compression, rebound adjust, tapered alloy steerer, 170mm travel | |
Bottom Bracket | SRAM DUB | |
Headset | FSA Orbit IS Integrated, 8mm cone spacer | |
Stem | Race Face Turbine R, 50mm extension, 35mm clamp diameter | |
Handlebar | Race Face Turbine R, 780mm x 20mm rise, 35mm diameter | |
Saddle | WTB Volt | |
Seatpost | Fox Transfer Dropper, 1x remote | |
Pedals | N/A | |
Grips | Jamis Lock-On |
Rear Derailleur | SRAM XX1 Eagle, 12-speed | |
|---|---|---|
Crank | Truvativ Descendant Carbon, 32T | |
Shifters | SRAM XX1 Eagle, 1x12-speed | |
Cassette | SRAM XG1299, 12-speed, 10-50T | |
Chain | SRAM XX1 Eagle, 12-speed | |
Brakes | TRP G-Spec DH 4-piston hydraulic disc, TR-33 180mm front & rear 6-bolt rotors |
Rims | Stans Flow CB7 Carbon 27.5" tubeless wheels, 15x110mm axle front and 12x148mm rear NEO hubs, Sapim Race spokes | |
|---|---|---|
Tires | Vittoria Martello 27.5 x 2.35", TNT tubeless |