2019 Mondraker
Neva

A 27.5″ aluminum frame hardtail women’s crosscountry bike with mid-range components.

Where to Buy

Similar Bikes

Top Comparison

Insights

Gearing

A bike with lower gearing will be easier to ride up steep hills, while a higher top end means it will pedal faster down hills.

Lowest gear

(climbing)

30 mph

Neva

27 mph

Similar Bikes

Highest gear

(descending)

Specs

Build

Frame	Neva 27´5 6061 Custolite Alloy triple butted, Avant Geometry, internal headset, replaceable hanger, BSA bottom bracket, QR 9mm rear axle BB Standard: BSA, 73mm, Threaded
Fork	Suntour XCT ATB RL 27´5 100mm, 28mm steel stanchions, 1-1/8” steerer tube, 9mm QR axle. Settings: spring preload, lockout Travel: 100mm Spring Type: Coil
Bottom Bracket	CH-52
Headset	CH-9280, Internal ZS, 44mm external diameter cup
Stem	MDK XC, alloy, 31.8mm barbore, rise: +/-7º, length: sizes S/M: 60mm, size L: 75mm
Handlebar	MDK XC 1.0, 6061 alloy, rise: 25mm, width: 660mm, 9º backsweep, 5º upsweep, 31.8mm barbore
Saddle	Mondraker Neva design
Seatpost	MDK XC, 6061 T6 alloy, diameter 27.2mm, length 350mm, offset 15mm Type: Rigid
Pedals	Supplied
Grips	Onoff Ergo

Groupset

Rear Derailleur	Shimano Acera M3000, Shadow, SGS, 9s
Front Derailleur	Shimano Altus M2000, down swing, down pull
Crank	40/30/22T
Shifters	Shimano Altus M2000, 3x9s
Cassette	SunRace CSMS90, 11-34T, 9s
Chain	KMC Z99, 9s
Brakes	Tektro Type: Tektro Hydraulic Disc
Brake Levers	Tektro HDM275 hydraulic

Wheels

Rims	MDK-XS1 27´5, 24mm external width, 32 spokes
Spokes	CN round stainless steel
Front Hub	MDK DC20, 9x100mm QR axle, cup & cone ball bearings, IS 6 bolts
Rear Hub	MDK DC22, 9x135mm QR axle, cup & cone ball bearings, IS 6 bolts
Tires	Front: Kenda Slant Six 27´5x2.35 single compound, 30TPI, wire bead, Rear: Kenda Slant Six 27´5x2.35 single compound, 30TPI, wire bead
Disc Rotors	Tektro HDM275 hydraulic, 160mm IS 6 bolts rotor

Rider Notes

Riders Also Viewed

First added September 15

Last updated September 15

Not listed for 2,448 days

2019 MondrakerNeva