2022 Cotic

Jeht Silver Deore

Cotic’s Jeht 2 is a superbly sorted, primarily UK-built, steel-framed trail charger that can tackle the toughest trails flat out in a distinctively charismatic, eco-friendly way

Leer reseña

New trail Cotic Jeht gen2 updates the popular steel mountain bike with tweaked geometry, suspension & more UK production…

Leer reseña

The Cotic Jeht trail bike propelled itself straight into a position as the UK brand’s most popular model, with sweet spot mid-travel suspension and sorted geometry. Although only lightly evolved, the new version feels like it’s been properly henched-up to tackle punishing park days, with a tougher, more grounded steel frame, and more suspension pop, putting it into contention among the best full-suspension bikes on the market. And now all the front ends are made in Scotland from custom recycled Reynolds steel, so there’s a double boost to the feel-good factor. Scottish made Reynolds steel front end 150mm fork, 140mm rear travel Evenly spaced, long dropper friendly ‘C’ sizing  More progressive suspension Eco friendly and excellent value Frame and geometry Cotic has been evolving its Reynolds 853 steel tube sets for just shy of 20 years, and the Jeht mainframe is loaded with subtle details such as the ‘Ovalform’ top tube and custom butted seat tube. After previously splitting Scottish and Far Eastern manufacturing depending on the batch of frames, Cotic has now fully committed to a front end that’s immaculately crafted by Edinburgh artisans Five Land. Who also handle the two (gloss crimson and matt sage) luxurious paint options. Additionally, the Jeht 2 gets two small but significant structural changes. A straight gauge, rather than butted, 853 ‘HD’ down tube, and a bracing post above the BB that’s pleasingly parallel to the similar pipe between top tube and seat tube. Despite the extra tube, and new down tube to increase strength, the frame hasn’t gained weight. At around 4.5kg it’s on par with alloy bikes of a similarly high strength, and not dramatically heavier than the actual weight of many carbon frames.  Linkages and other alloy hardware are machined into existence by Rideworks here in the UK, and everything is smoother and tidier than the slightly agricultural aesthetic of older Cotics. Chainstays are still offshore alloy, but with neat Syntace dropouts (no UDH yet) and the same heavy-duty main pivot block as the 170mm travel RocketMAX. Apart from the rear chainstay, cables/hoses are all routed externally using bridge clamps. Bearings are top quality lifetime warranty Enduro Max units and there’s ample clearance for 29 x 2.5in tyres. Bottle/accessory mounts under the top tube and the down tube look awkward, but they do work, and a Restrap-made frame fit bag is coming soon. You even get a Datatag security tracker installed as standard. Using steel also significantly reduces the eco impact of the frame, as Reynolds uses 100% recycled steel, and the mainframe can be recycled itself at the end of its life. And the tubes themselves are now made in Birmingham, which is a lot closer than shipping them in from the Far East.  Geometry still starts with a 64.5º head angle on all sizes, but Jeht now gets the same ‘C’ sizing protocol as the Cotic FlareMax and Rocket Max with more regular reach increases from 444mm to 520mm. Seat tubes are now shorter to work with longer …Continue reading »

Leer reseña