2019 Canyon Spectral AL 6.0 EX

Summary

Brand

Description

Canyon’s 2019 Spectral AL 6.0 EX is a modest component level aluminum frame allmountain bike.

Build

Frame	Canyon Spectral AL, 140mm Travel, Easy handling through simplified bearing design, Optimised design for direct cable routing, Tapered Head Tube, PressFit Bottom Bracket, Reverb Stealth Compatible, 12x142 Canyon Through Axle System, Sram and Shimano Direct Mount Derailleur Hangers, 180mm Direct Post Mount Compatible, Weight: 2570 g (M)
Fork	RockShox Pike RC, Charger Damper - Sensitive spring behaviour downhill and no loss of energy uphill, Solo Air - Perfectly balanced ratio between both air chambers, Maxle Lite 15 mm - Maximum stiffness and control of the front at minimum weight, Rapid Recovery, Spring travel: 150 mm
Rear Shock	RockShox Monarch RT, Dual Flow Adjust provides both big hit and small bump performance, Rapid Recovery ensuress faster shock recovery from successive hits so the wheel stays in contact with the ground for longer for more control, Weight: 325 g (approx.)
Bottom Bracket	SRAM GXP Pressfit
Headset	Canyon \| Acros
Stem	Race Face Aeffect, Angle: + / - 6°, 1 1/8" clamp, Stack: 39mm, Bar clamp diameter: 35mm, Light 6061 aluminium
Handlebar	Race Face Aeffect, Width: 760 mm, Diameter at clamping area: 35 mm
Saddle	SDG Circuit MTN, Flat construction with lightweigh EVA foam, Base cut out reduces pressure, CroMo saddle rails, Micro fibre upper, Weight: 220 g
Seatpost	RockShox Reverb Stealth, Dropper post with infinite height adjustment, Internally routed hose for clean look, 125 mm of adjustment, Diameter: 30.9 mm
Pedals	—
Grips	Ergon GE10 Slim

Components

Rear Derailleur	SRAM GX, 11s, X-HORIZON™ design reduces the shifting force, ‘ghost shifting’ and chain slip, Sealed industrial bearings, Aluminium cage, 11-speed
Shifters	SRAM GX, 11s, SRAM 1x™ X-ACTUATION™ for precise and reliable performance, Lever made of aluminium, Unobtrusive clamp, 11-speed
Crank	Race Face Turbine DM, CNC machined of ultra-high strength 7050 alloy crank arm
Cassette	SRAM XG-1150, 11s, XD™ driver body, 11 speed, 10-12-14-16-18-21-24-28-32-36-42
Chain	SRAM PC-1110
Brakes	SRAM Guide R, 4 Piston calliper, Tool-free lever reach adjustment, Centerline Rotors, Rotor Diameter: FW 200mm / RW 180 mm

Wheels

Rims	DT Swiss M 1700 Spline Two, Straight spoke distribution, Pawl system hubs, Rim width: 30 mm
Tires	Maxxis High Roller II 2.3 \| Maxxis Minion Semi Slick 2.3, TR EXO 3C MaxxTerra Rubber Compound, Folding Tyre System, Tyre Construction: 60 TPI carcass, TR bead and EXO side walls, Tubeless Ready

Geometry

Oh snap! This frame was drawn from the actual bike geometry measurements. Roll over the table below to highlight frame dimensions.

🐐 Measurements listed in millimeters and degrees

Replacement Parts

Summary

Brand

Replacement Parts